Easy2Boot - The NEW All-in-One Multi-Boot USB Solution!

Boot ALL your ISO's from one USB drive!



Opo! Tama po ang mga nabasa nyo! Makakapag-install po kayo ng any OS gamit lang ito at mismong ISO files lang ang kokopyahin sa usb�

ISO files or IMG, IMA, etc.


Ok, let�s start!!!


Files Needed:

1. RMPrepUSB -> here is the latest Installer version / here is the latest Portable version
2. Easy2Boot -> as of now, here is the latest stable version
3. Any ISO, IMG, or IMA files (lets call it Payload Files)
4. (Optional only) DPMS-> for Installing XP purposes



1. Una, i-format ang usb gamit ang RMPrepUSB



1.1 Press Refresh
1.2 Select the right usb drive
1.3 Indicate the size and volume label (max size if full format)
1.4 Select WinPEv2/WinPEv3/Vista/Win7 bootable
1.5 Select FAT32 if you have 4GB or less. NTFS if you have 8GB or more, or its up to you.
1.6 Tick �Boot as HDD� if you like to have 2 partition in you usb. By adding a small, hidden second partiton to the drive, some BIOSes will treat the drive as a hard disk and not a removable drive (may not be liked by some BIOSes). Untick all overrides if you want USB-HDD with only 1 partition. Sa case ko, ok lang kahit di lagyan ng check ito kasi gumagana din naman�
1.7 Press �Prepare Drive� and then a prompt will appear, then press ok�
1.8 Press �Install grub4dos�.


Warning!!!!

This process will format your usb flash drive� Kung meron mang laman ang usb nyo, marapat lamang po na kopyahin nyo muna sa PC dahil mabubra po lahat laman nyang usb flash drive�


2. I-copy lahat ng laman ng Easy2Boot zip file papunta usb na gagamitin. I-replace kung anu man ang lumabas na prompt.







3. Pagkatapos ma-copy, I-copy naman ang mga Payload Files na pang-install or pang-reformat nyo sa nararapat na folder�


The Main Menu folder
\_ISO\MAINMENU <--- Payload files that you want listed in the Main Menu go here (or in the sub-folders
with a .mnu file)


Sub-menu folders: (these folders are listed as menu entries in the Main menu, if populated)
\_ISO\ANTIVIRUS <--- for any AV payload and .mnu files
\_ISO\BACKUP <--- for any BACKUP payload and .mnu files
\_ISO\DOS <--- for any DOS payload and .mnu files
\_ISO\LINUX <--- for any LINUX payload and .mnu files
\_ISO\UTILITIES <--- for any UTILITIES payload and .mnu files
\_ISO\WINPE <--- for any WINPE payload and .mnu files



Special payload-only sub-menu:
\_ISO\AUTO <--- for any payload files only (you can use sub-folders) - .mnu files are ignored.

Windows Install ISO folders: (if any .ISO files are present a Windows entry will be listed in the Main menu)
\_ISO\WINDOWS\SVR2012 <-- Server 2012 Install ISOs go here
\_ISO\WINDOWS\SVR2K8R2 <-- Server 2008 R2 Inst ll ISOs go here
\_ISO\WINDOWS\VISTA <-- Wndows Vista Install ISOs go here
\_ISO\WINDOWS\WIN7 <-- Winodws 7 Install ISOs go here
\_ISO\WINDOWS\WIN8 <-- Windows 8 Install ISOs go here
\_ISO\WINDOWS\XP <-- XP Install ISOs go her


4. Then, Viola! That�s it! Pwede na pong gamitin ito pang-install ng OS or i-boot ang mga utility ISO files tulad ng Hiren�s Boot CD or UBCD�




For Installing XP:


1. First, You need to download XP x86 32-bit Mass Storage Driver Pack (x86 NT5) from here http://driverpacks.net/driverpacks/w...86/massstorage
e.g. Sep. 24 2012 Windows 200/XP/2003 x86 Mass Storage version=12.09
Click on the Download button which will download a Torrent file (e.g. DP_MassStorage_wnt5_x86-32_1209.7z)
Use BitTorrent (or your favourite Torrent app) to download the .7z file

2. Unpack the contents of the Driver Pack zip file to your USB Flash drive�s \_ISO\E2B\grub\DPMS folder (see folder tree below)

3. Rename the INI file at \_ISO\E2B\grub\DPMS\DriverPack_MassStorage_wnt5_x86-32.ini to \_ISO\E2B\grub\DPMS\DriverPack.ini

E2B Folder structure for DPMS is:
\_ISO\E2B\grub\DPMS\DriverPack.ini <-- driverpack ini file - renamed by you!
\_ISO\E2B\grub\DPMS\dpms2.bat <-- main grub4dos batch file
\_ISO\E2B\grub\DPMS\chkpci <-- grub4dos executable
\_ISO\E2B\grub\DPMS\fat <-- grub4dos executable
\_ISO\E2B\grub\DPMS\inifile <-- grub4dos executable (new version!)
\_ISO\E2B\grub\DPMS\E2B_DPMS_ReadMe.txt <-- (help file - can be deleted)
\_ISO\E2B\grub\DPMS\TestDPMS2.g4b <-- For developers only - will test DPMS2.g4b using many different PCI IDs � can be deleted
\_ISO\E2B\grub\DPMS\FIRA <-- Firadisk driver folder
\_ISO\E2B\grub\DPMS\WINV <-<-- WinVBlock driver folder
\_ISO\E2B\grub\DPMS\D <-- Driver folder (no files)
\_ISO\E2B\grub\DPMS\D\M <-- driver folders go here (e.g. I3, I4, V, etc.) extracted from the
DP_MassStorage_wnt5_x86-32_XXXX.7z)

4. Copy your XP Installer ISO file/s to \_ISO\WINDOWS\XP. Then, boot from Easy2Boot(USB), then select �Windows Install� or just press �W�. And then select �Install XP � Step 1�.




5. Tapos, pili po kayo ng XP ISO. Then, kapag lumabas na yung �Auto Detect SATA/AHCI/RAID Mass Storage Driver�, Press �Y�, then Enter.



6. Wait until it loads like this.


Kelangan yan kasi kapag walang ganyan, BSOD ang kalalabasan nun. Di magtutuloy ang installing mo. Yan din yung DPMS na nadownload kanina dun sa STEP 1. Then Wait until Blue Screen with �Windows SetUp� appear. Proceed on Drive Partitioning, yung normal na ginagawa kapag cd ang gamit mo.

7. Pagkatapos nun, magrereboot yan. Boot again to your Easy2Boot, then proceed to �Install XP - Step 2�. Select what memory you have.


Di ko lang po matandaan kung may nalabas na �Press Any Key to Boot on CD or DVD� dito sa Step 2. Pero kapag may lumabas na ganun, wag po kayo pipindut ng kahit anung key kasi uulit uli kayo sa umpisa nun.

Then it proceed to 2nd part of Installing hanggang sa matapos nyo na.


For Installing Win7:


1. Copy your Win7 Installer ISO file/s to \_ISO\WINDOWS\WIN7. Then boot from Easy2Boot(USB), then select �Windows Install� or just press �W�. Then select Install Windows 7.



2. Then select what version of Win7 you like. It depends on how many Installer ISO files (payload files) you have in that folder.



3. Then Press 1 for Sample.xml, magwowork pa rin naman yan kahit sample lang yan.



4. Wait until the �Press Any Key to Boot on CD or DVD� appears. Dapat pumindot ka ng kahit key dun sa portion na yun para maboot nya yung Installer mo.


5. Kapag nag-proceed na sa Preparing SetUp (yung screen na may ibon at dahon), dapat may lalabas na command prompt na kulay blue ang background at nagtatanong ng �Do you want prepare on restore or no (install instead)?�. Type �n� on that portion, then enter. Kapag walang lumabas na command prompt sa portion na yun, magiging fail lang ang pag install mo nyan.


6. Then, language and the agreement will appear. Tapos gawin mo na typical na procedure sa pag-install Win7. Partitioning, formatiing and selecting the drive you want to install. Then it will reboot.


7. Boot again from Easy2Boot, repeat the step 2 to 4, but this time, when �Press Any Key to Boot on CD or DVD� appears, don�t press any key so you wouldn�t hassle to start all over again. Continue on the 2nd part of installing Win7 until it reboot and that�s it!



Sensya na po, wala pa po ako para sa Win8, di ko pa na try, pero kung gusto nyo, try nyo na lang po. Parang halos parehas lang sila ng procedure sa Win7. Sa part lang ng pag enter ng license key nagkaiba� try ko na lang magprovide ng TUT kapag meron na akong Win8 pati sa Linux din.


Booting Hiren�s Boot CD:

You need MNU file to run Hiren�s Boot CD ISO file correctly. (see attached). Then copy paste it to \_ISO\MAINMENU\UTILITY together MNU and ISO file. Boot from Easy2Boot then select Hiren�s.Boot.CD.15.2.



ALL CREDITS TO THE CREATOR OF THIS.... steve... RMPrepUSB...

http://www.rmprepusb.com